Please Note: This battery plate is to be used with the older plastic controller of the FL400/FL800.Image for illustrative purposes ONLY. Actual product may differ. Please see details box for condition information.
Cineroids uniquely-sized FL400 LED light delivers a high power output in a compact, lightweight & flexible design.
Out of the box, FL400 operates from mains electricity using the included AC power supply. With the BH-FL400V, users are able to ‘cut the cord and power the FL400 light from V-Mount batteries.
The plate fits directly on the rear of the FL400s lighting controller using a secure quick-mount mechanism. When battery power is not required, its fast & simple to remove, returning the controller to its original compact form.
A short DC cable extends from the battery plate, connecting to the power input port on the lighting controller. The cable is held securely using a multi-position cable guard.
Two 1/4-20” threaded holes make it possible to mount the controller using any appropriate grip equipment, such as a SuperClamp or articulating arm.
A battery powered lighting setup creates all-new setup opportunities, including operation ‘in the field or in remote locations.
USED Pre-Owned Cineroid BH-FL400V (BHFL400V) V-Mount Battery Plate for Cineroid FL400 70.20 +VAT
↧
↧
FocusBug Technologies Inc UBS-100 (UBS0100) Ultrasonic Base Sensor - Cine RT System Package 6864.52 +VAT
One-piece design incorporates all on-camera systems into a single compact unit.
An easily adjustable Film Plane Offset function allows for a variety of camera mounting options.
An approximate 14° field of view and 35+ (10.6m) maximum range in RANGERmode.
Up to 130° angle of view and 120 (36.5m) maximum range in BUG& HANDSETmodes.
Fully adjustable Sensitivity setting to optimize the Rangefinder for changing target conditions.
Advanced LIMITSand LOCKOUTfeatures that allow quick and easy elimination of unwanted targets & reflections.
Ultrasonic timeslot synchronization allows two CINE RT systems to work in the same physical/acoustic space without crosstalk.
SerialOutput to send distance data to Preston HU3, Arri WCU-4and other compatible devices.
CINE-TAP MODE to enable compatibility with existing rangefinder systems.
An internal Class 3R laser for easy orientation and targeting.
Compatibility with up to 4 BUG miniature Ultrasonic Transmitters.
Self regulating thermostat to ensure accurate ultrasonic distance calibration.
Easily interchangeable mounting options and genuine LEMO hardware.
↧
HPRC ROS2500-01 (ROS250001) HPRC2500 Hard Case for DJI Ronin-S 150.83 +VAT
This watertight and waterproof hard case, based on theHPRC2500series, is specifically designed to easily transport theDJI RONIN S. It features a pre-cut high-density foam interior that holds the gimbal and everything that comes in the box, guaranteeing their transport in one container, in complete safety. Thanks to the lightweight and to the ergonomic handle, as well as resistant, the case is also very handy. Carry-on approved size. The case is impact, drop and corrosion resistant, and features a neoprene seal that, when properly closed, keeps the case watertight and your gear protected even if submerged in shallow water.
The case stores (not included): Gimbal with Focus Wheel, Extended Grip/Tripod, Camera Mounting Plate, 24W Usb Power Adapter, BG37 Grip x 2 and Accessories Box.
↧
USED Open Box Gudsen MOZA Dual Handle for MOZA AirCross Gimbal and MOZA Air Gimbal (p/n GA21) 66.75 +VAT
Please note: Image for illustrative purposes ONLY. Actual product may differ. Please see details box for condition information.
The Gudsen MOZA dual handle is for use with the MOZA AirCross gimbal or the MOZA Air gimbal.
↧
USED Open Box Brinno TLC200 (TLC-200) Time Lapse Camera with 1.4 LCD Display and SD Card Slot 94.39 +VAT
Please note: Image for illustrative purposes ONLY. Actual product may differ. Please see details box for condition information.
Dedicated Time Lapse Camera:
With Brinno ready-to-view technology, you get a real Time Lapse Video, not thousands of separate photos. No fancy equipment, no interval meter, no complicated gear setups, no external time-control, no video-making troubles.
Stunning Long Lasting:
With Brinno Unique Power Control Technology, 4 AA batteries can capture 270,000 frames. Whatever short term or long term event youre recording, dont worry about the battery life.
Get Creative - No Limits:
Turn it on, let it record anything. Flower blooming, built a Lego castle, oil painting creation, family party…With a Brinno, make everything into a funny time lapse video.
↧
↧
USED Open Box Rode PG2-R (PG2R) Pistol Grip Shock Mount with Rycote Lyre Suspension 48.75 +VAT
Please note: Image for illustrative purposes ONLY. Actual product may differ. Please see details box for condition information.
The PG2-R is a Pistol Grip Shock Mount designed to reduce handling noise when recording with shotgun microphones in hand held or boompole mounted applications. The PG2-R is equipped with dual Rycote Lyre mounts to ensure maximum isolation from any handling vibrations, four possible mounting points to suit the complete range of compatible Rode shotgun microphones and integrated cable management clip.
The newly designed lightweight handle delivers improvements in both ergonomics and functionality. The cushioned grip houses multiple cable mounting points, with a dedicated space for the PG2-R Pro Cable XLR connector to terminate flush with the base for ease of connectivity. A heavy duty locking nut on the side of the handle ensures smooth adjustment of your microphone angle, whilst a 3/8 thread at the base of the handle provides secure connection to boompoles and microphone stands.
↧
SmallRig 2123 (SR2123) Camera Cage for Fujifilm X-H1 66.42 +VAT
**PLEASE NOTE: Camera is not included. Images are for display purposes only**
SmallRig Fujifilm X-H1 Camera Cage 2123 is specially designed for Fujifilm X-H1 camera. It features an all-round protection for the camera. The cage is designed to attach the accessories quickly.
It comes with 3 NATO rails on the top and at the side, whereby NATO Handle 1688 could be mounted for handheld shooting. Wooden Handle 2118/2117 could be mounted on the side for better handheld experience. Arri 3/8” points on the top and side could be mounted with Magic Arm with Arri Locating Pins 2115 for stability and anti-twist purpose for monitor. At the bottom is a built-in Arca Swiss plate, and when combining with Rail Support System Baseplate 2092, it enables 15mm rail support for matte box and follow focus operation and quick switch between different shooting modes.
↧
Aputure Barndoors for C120D, C120DII and C300D Lights (p/n 6947214409424) 52.49 +VAT
These barndoors are a must have companion for the LS C120 series and LS C300D series lights.
↧
Bright Tangerine Clash 138 Matte Box for 4x4, 4x5.65inch and 138mm Filters (p/n B1220.0001) 447.00 +VAT
The Clash 138 is an ultra-lightweight matte box, weighing in at only 270 grams, it excels in run & gun setups, aerial shooting, gimbal and Steadicam work.
Like the Misfit Atom, the Clash 138 has been designed to accommodate up to two 4×4″, or 4×5.65″ PV sized filters (or a combination of both) within its frame. The Clash 138 also offers you the option of mounting a single 138mm circular filter, in addition to the two filters already in the frame.
138mm circular filters are mounted using the Clash 138 Rota Ring. Any standard 138mm circular filter from a number of popular manufacturers can be used including polarizers, diopters, split-diopters and FX filters like diffusion. Once mounted, the 138mm circular filter can easily be rotated up to 120 degrees by using the sliding lever on the Rota Ring. This range of motion is more than enough to effectively use a circular polariser, which only requires 90 degrees of rotation to achieve minimum to maximum effect.
Polarisers are a great tool to reduce glare from reflected surfaces and are recommended when shooting into water, through windows and landscapes as the effect cant be recreated in post production.
Diopters are also a great filter to have which are just like a magnifying glass. They also shift the minimal focus distance so you can get macro shots without having to use a macro lens. Diopters come in varying strengths with +1, +2 and +3 being the common strengths.
When using a +1 diopter, one additional 4×4” or 4×5.65” can be mounted into the frame. If you are using a +2 diopter, no additional filters can be mounted due to the thickness of the diopter. A +3 diopter can be used with the Clash 138 using the rubber bellows donut or Black Hole.
The circular filter is easily secured inside the Clash 138, with no risk of it falling out whilst filming. When no circular filter is being used, the Rota Ring can be removed to allow the matte box to clamp further onto the lens for a wider field of view.
The rubber sunshade provides protection from flares, and can be removed for an extra weight saving of 100 grams. This feature is also very useful when filming with drones, as it helps reduce wind resistance.
A carbon fibre top flag is also available to provide more protection from the sun or studio lights, helping improve the contrast and resolution of your image.
To minimise internal reflections, an optional tilt adaptor can be mounted on the Clash 138 matte box. This additional tilt bracket adds 6 degrees of tilt, for up to two filters.
The Clash 138 has a native 143mm Clamp-On mounting surface, which is also compatible with our clamp-on ring adapters, and rubber donuts, allowing for use with a variety of Cine and Photo lenses, including square front anamorphic and telescoping lenses. The clamping screw provides quick and easy mounting to secure the Clash onto the lens.
By using the rubber bellows or Black Hole donuts, you can add a second 138mm circular filter, converting the Clash 138 into a 4-Stage Matte Box.
A 15mm LWS support bracket for rail mounting can be added to the Clash 138, which can also be adapted for 15mm Studio & 19mm Studio rails.
↧
↧
Aputure EZ Box+ II (Easy Box) Softbox with Grid for Amaran 528/672 and Tri-8 Lights (p/n 6947214409400) 57.50 +VAT
Aputures EZ Box+ II Softbox can perfectly fit Amaran HR672, AL-528 and Tri-8 lights for the purpose of consistency and durability. It provides exceptional soft light effects in a compact and portable package without blocking the cooling vents.
↧
LS (LED650AS) Pro LED Light Dimmable for Studio - Bi-Colour 295.00 +VAT
LED Video light LED650AS is composed of 648pcs of bright LEDs with standard colour temperature and high CRI and TLCI reaching up to 93 and above. It is all-aluminium design of the light body for better heat dissipation.
It is the Bi-color version, the LCD display at the back of the light shows the brightness, colour temperature and the battery level. The light can be powered by the battery(DC) or the AC power adapter. The front barn doors can be easily taken off without any tools and the light can also be used with the honeycomb.
↧
Aputure Light Dome Mini II for LS120 and LS300 Lights (p/n 6947214409561) 114.16 +VAT
A carry-around convenient soft beam. Ideal for smaller studios and tight shooting spaces. Re-designed with a fixed construction for a fast, one-person, setup. Bundled with a honeycomb grid, gel holder and 2 diffusers (1.5 stop and 2.5 stop brightness).
↧
USED Open Box Blackmagic Design UltraStudio Mini Recorder - ultra small pocket sized Thunderbolt powered recording from SDI and HDMI (BMD-BDLKULSDZMIN
Please note: Image for illustrative purposes ONLY. Actual product may differ. Please see details box for condition information.
When you need tiny sized portable video capture and playback for your Thunderbolt laptop or desktop computer then UltraStudio Express and UltraStudio Mini are the perfect solution. You get an extremely affordable solution with high quality SD and HD video all powered from the Thunderbolt connection so you just plug in and go! UltraStudio Express includes capture and playback of SD/HD-SDI, HDMI and analog video and analog audio all in the one beautifully designed model. UltraStudio Mini Recorder is the pocket sized SDI and HDMI recorder and UltraStudio Mini Monitor features SDI and HDMI playback, perfect for simple low cost NLE monitoring.
This UltraStudio Mini Recorder works with Mac OS X 10.7 Lion or later, and Mac OS X 10.8 Mountain Lion or later.
Please clickherefor software updates.
↧
↧
USED Pre-Owned Canon 70-200mm f/2.8L IS II UsM L Series Zoom Lens - Canon EF Mount (p/n 2751B005AA) 1000.00 +VAT
An essential telezoom lens for sports, wildlife or portraits.
The EF 70-200mm f/2.8L IS II USM is a workhorse telephoto zoom lens designed for professional use. It has a rugged durable design, a four-stop Image Stabiliser and specialised lens elements.
L-series qualityThe L-series is Canon's flagship professional lens range, representing the best in precision-designed EF optics. L-series lenses combine superior performance with superlative handling, and are resistant to dust and moisture.
Fast, constant maximum apertureShoot hand held in low light conditions thanks to a fast f/2.8 maximum aperture, which stays constant throughout the zoom range. Such an aperture also gives a photographer control over depth of field.
Image StabiliserCanons four-stop Image Stabiliser (IS) makes the EF 70-200mm f/2.8 IS II USM ideal for shooting in low light conditions when using a tripod is not possible. The IS system allows shutter speeds up to four stops slower than normal to be used without causing image blur.
Fluorite and ultra-low dispersion (UD) lens elementsThe lens features elements made from fluorite, which reduce chromatic aberration. Five UD (ultra-low dispersion) elements are used to ensure high contrast and natural colour reproduction throughout the zoom range.
Smooth background blurA virtually circular aperture diaphragm gives out of focus regions a softer, more uniform feel. Sharp foreground objects stand out against a smooth blurred background.
Ultrasonic focusingA ring-type ultrasonic motor drives autofocus extremely quickly, and in near silence. Excellent holding torque ensures the point of focus is reached accurately, without overshooting. Furthermore, full-time manual override is available, making it possible to adjust focus without leaving AF mode.
AccessoriesThe lens is supplied as standard with the ET-87 lens hood to prevent glare affecting images, as well as a removable tripod mount and soft case.
↧
USED Open Box Camrade CAM-CS-PMW300 (CAMCSPMW300) Camsuit PMW 300 for the Sony PMW-300K1/K2 camcorders 165.00 +VAT
Please note: Image for illustrative purposes ONLY. Actual product may differ. Please see details box for condition information.
The camSuit PMW-300 is a tailor-made Cordura® nylon, form-fitted camera cover designed to protect the Sony PMW-300. It has a built-in rain cover that is always easily accessible from the side pocket when you need it. This camRade innovation protects your costly PMW-300 from dust, dirt, rain, sun, bumps, and scratches during your work at a shoot, it also protects the viewfinder. This camera suit is equipped with several vinyl windows and Velcro flaps so you can still view and access your controls. This cover could be a lifesaver if youre shooting reality TV, documentary or remote style shooting. Packed in a waterproof zippered pocket.
↧
Shape GVPRC (GV-PRC) Gold Mount to V-Mount Regulated Battery Converter 73.88 +VAT
Please Note: Both sides of converter is shown for display purpose, only one converter is provided.
ShapeGold Mount to V-Mount Regulated Battery Converter allows you to use Gold Mount batteries on a camera that has a V-Mount plate.
↧
Shape KBFS5 (KBF-S5) D-Box Battery Kit - for AU-EVA1, FS5, FS5M2, FS7 and FS7M2 491.79 +VAT
**PLEASE NOTE: Camera and Stand are not included. Images are for display purposes only**
D-Box
Completely compatible with the EVA1, FS7, FS72, FS5 and FS5M2, the D-Box is small size and lightweight and comes equip with a V-Mount Battery Plate with safe lock. When the D-Box is plugged in safely disconnect and reconnect the battery without powering down your rig. There are threaded holes at the back of the plate for mounting onto a cheeseplate and it also comes with a robust 15mm Rod Mount with locking and angle adjustment system and LED indicators for power features. It five outputs include 5V:4A:20W, 8V:5A:40W, 12V:5A:60W, 16.8V:6A:100W and USB 5V:4A.
Connectors
Cables are compatible with all components and fit EVA1, FS7, FS7M2, FS5 and FS5M2. The output cable is compatible with 5V, 8V or 12V outputs.
Charger and Power Devices
The BP Charger input can be in use simultaneously with the battery charging, the AC Adapter input is to be used without a battery.
15mm Rod Mount System Device
The Delta Plate is included to mount on the D-Box Main Unit, the knob system is used to lock and adjust the position of the D-Box Unit.
↧
↧
Shape RSPA (RS-PA) RED DSMC2 Shim Plate for ARRI Standard Bridge Plate 15/19mm Studio 67.16 +VAT
Lightweight and robust shim plate for REDs DSMC2, EPIC, SCARLET, RAVEN, DRAGON, MONSTRO, HELIUM and GEMINI, perfect to balance on a Tripod, Gimbal or Drone.Perfect to be mounted on our robust ARRI Standard 19mm or 15mm Bridge Plate (DP19S, DP15S) to adjust your camera height to the right optical center for your Matte Box and rod support accessories.
↧
CoreSWX PBE-BMPC4 (PBEBMPC4) Powerbase Edge for Blackmagic Pocket 4K 230.00 +VAT
The follow-up to the highly successful Powerbase70, the Powerbase Edge is a feature-rich “small-form” Cine and DSLR pack, in a v-mount form. The 14.8v Lithium Ion pack includes one 8v port to power various cameras, two USB output, and two power tap outputs, one of which being a SmartTap.
The 8v port provides a common power output for the majority of DSLRs and small-form cine cameras on the market which utilize small 7.4v Li-Ion battery packs. There are an assortment of dummy battery cable attachments available which insert into that 8v port. In addition to powering the camera, two on-board powertaps are accessible to power monitors, lights, wireless transmitters, etc. The two available USB ports are a welcoming addition to power/charge mobile devices on the fly, as well as power any 5v accessories(i.e. select audio recorders).
As it is often difficult to approximate runtime when powering the camera as well as multiple devices, the Powerbase Edge has a built-in runtime LCD, to deliver exact battery expectancy to the minute. The LCD also has a button activated backlight to be view-able in any environment. As with its predecessor, the Edge has a quick release plate to attach underneath the camera, or quickly attach/detach to a rig or camera cage. It is 30% smaller then the Powerbase 70 yet can still withstand the draw of a full size Cinematic cameras.
The Edge will power the BMD Pocket 4k for 4 hours continually, vs. a standard LPE6 battery pack which only provides 45min, making it a perfect solution for production.
Includes PB70-C15 charger and battery cable for the BMD Pocket 4K.
↧
SmallRig 2070 (SR2070) Articulating Arm with Double Ballheads (1/4inch Screw) 36.57 +VAT
**PLEASE NOTE: Camera and Monitor are not included. Images are for display purposes only**
SmallRig Articulating Arm 2070 comes with a ballhead (1/4 Screw) on each end respectively to expand more mounting possibilities for different shooting scenarios as per your needs.
SmallRig Articulating Arm 2070 includes double ballheads with 1/4 screws on both ends and a ballhead clamp. It could attach cage with 1/4-20 threaded holes, like Sony Camera Cage 1661 or top plate with 1/4-20 threaded holes, such as Top Plate 1853/1974/2032 on the one end, and it could also attach monitor with 1/4-20 threaded hole on the other end. It features a thumb screw on each end to lock the device manually. The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp, and a single wingnut is applied to lock the double ballhead tight directly. It is equipped with O rings to increase the friction with the ballhead clamp and prevent scratches and rubber cushions to prevent the monitor from scratches.
↧
More Pages to Explore .....
